genuine products

Genuine
Products

Assured Quality

Assured
Quality

Product Traininig

Product
Traininig

Installation, Maintenance & Support

Installation, Maintenance & Support

Seamless Connectivity in High Density Enterprise Environments

Designed to accommodate the networking requirements of large, high-density enterprise infrastructures, the Cisco Catalyst 9136 Series access points with Wi-Fi 6E technology, 6-radio configuration, and advanced features ensure high speed, low latent, and secure connectivity.

Cisco Catalyst 9136 Series Access Points

Features 

Wi-Fi 6E Technology

Wi-Fi 6E Technology

Extends Wi-Fi 6 into the 6-GHz band, enabling faster speeds, and security for high-density networks and applications.

MU-MIMO Technology

MU-MIMO Technology

Supports 16 spatial streams for simultaneous data transmission to multiple devices and improving network throughput.

Dual Multigigabit Ethernet Ports

Dual Multigigabit Ethernet Ports

Provide power-redundant uplink ports with speeds up to 5 Gbps for continuous and reliable performance during failover.

Environmental Sensors

Environmental Sensors

Built-in air quality, temperature, and humidity sensors ensure workplace safety, avoiding the need for separate sensors.

Target Wake Time (TWT)

Target Wake Time (TWT)

Scheduling data transmissions in advance facilitates energy efficiency and prolongs the battery life of IoT devices.

Band Steering

Band Steering

Smoothly steer the Wi-Fi 6E-supported client devices to the 6-GHz bands, freeing up the remaining bands for other devices.

Bluetooth 5 Integration

Bluetooth 5 Integration

Integrated Bluetooth Low Energy (BLE) radio assists with location-based services like asset tracking, and navigation.

Cisco Trust Anchor Technologies

Cisco Trust Anchor Technologies

Advanced protection against security breaches and unauthorized access, ensuring hardware and software authenticity.

  • Software :
    • Cisco IOS XE Software Release 17.7.1 or later
  • Supported wireless LAN controllers :
    • Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)
    • Cisco Catalyst 9k switches with Embedded Wireless Controller in SDA mode
  • 802.11n version 2.0 (and related) capabilities :
    • 4x4 MIMO with four spatial streams
    • Maximal Ratio Combining (MRC)
    • 802.11n and 802.11a/g beamforming
    • 20- and 40-MHz channels
    • PHY data rates up to 1.5 Gbps (40 MHz with 5-GHz and 20 MHz with 2.4-GHz)
    • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
    • 802.11 Dynamic Frequency Selection (DFS)
    • Cyclic Shift Diversity (CSD) support
  • 802.11ac :
    • 8x8 downlink MU-MIMO with eight spatial streams
    • MRC
    • 802.11ac beamforming
    • 20-, 40-, 80-, and 160-MHz channels
    • PHY data rates up to 3.4 Gbps (8x8 80 MHz or dual 4x4 80+80 MHz on 5-GHz)
    • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
    • 802.11 DFS
    • Cyclic Shift Diversity (CSD) support
    • Wi-Fi Protected Access (WPA) 3 support
  • 802.11ax :
    • 8x8 uplink/downlink MU-MIMO with eight spatial streams (5-GHz)
    • 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 and 6-GHz)
    • Uplink/downlink OFDMA
    • TWT
    • BSS coloring
    • MRC
    • 802.11ax beamforming
    • 20-, 40-, 80-, and 160-MHz channels (6-GHz)
    • 20-, 40-, 80-, 80+80-MHz (5-GHz)
    • 20-MHz channels (2.4-GHz)
    • PHY data rates up to 10.2 Gbps (4x4 160 MHz on 6 GHz, 8x8 80 MHz on 5-GHz, and 4x4 20 MHz on 2.4-GHz)
    • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
    • 802.11 DFS
    • CSD support
    • WPA3 support
  • Integrated antenna :
    • 2.4-GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
    • 5-GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
    • 6-GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
  • Interfaces :
    • 2x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45)
    • Management console port (RJ-45)
    • USB 2.0 at 9W
  • Indicators :
    • Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
  • Dimensions (W x L x H) :
    • Access point (without mounting brackets): 9.9 x 9.9 x 2.2 in. (25.1 x 25.1 x 5.6 cm)
  • Weight :
    • 3.6 lb. (1.65 kg)
  • Input power requirements :
    • 802.3bt Cisco Universal PoE (Cisco UPOE), 802.3at Power over Ethernet Plus (PoE+)
    • Cisco power injector, AIR-PWRINJ7=
    • 802.3af PoE (only for configuration staging, all radios off)

The Cisco Catalyst 9136 Series, with advanced technologies such as OFDMA, MU-MIMO, and intelligent radio management delivers a faster and uninterrupted networking experience. With support for the expanded 6-GHz band, these access points provide an additional 1.2 GHz of interference-free spectrum for facilitating low-latent connectivity. The Smart AP feature adjusts the radio stream count according to the user density, reducing power consumption. The users won’t have to worry about security with WPA3 encryption and Cisco Trust Anchor technologies such as image signing, secure boot, and Cisco Trust Anchor module. The BSS coloring or spatial reuse technology, intelligent capture, and flexible radio assignment also make the Cisco Catalyst 9136I model ideal for reliable networking in dense network environments.

Frequently
Asked Questions (FAQs)

Let’s

Get Connected!

Please provide your details below, and we will get in touch with you shortly.

0+

Years Experience

0+

Happy Clients

0+

Projects

0+

Employees